Jack Puck Presses

Jack Pucks are revolutionary presses created to transform plant extracts into a compact paste and to remove excess water.

Equipped with a 2 ton or 8 ton load capacity hydraulic jack, Jack Pucks are light & compact, easy to carry presses.

User Instructions:

• Fix the press to a table with the two 'C' clamps supplied.
• Put the extracts in the mould
• Put on the cover and tighten it up with the wing nuts.
• Tighten the release valve with the handle (clockwise).
• Compress the extracts with an up-and-down movement of the handle.
• Loosen the release valve using the handle (counterclockwise).
• Remove the cover by removing the wing nuts first.
• Put back on the wing nuts without installing the cover.
• Tight the release valve with the handle (clockwise).
• Remove the compressed extracts from the mould using an up-and-down movement with the handle.
• Loosen the release valve using the handle (counterclockwise).
• Bring down the mould's base using your fingers.

Warning:
• Do not use the jack for any other uses than this press.
• Never use a long handle than the one supplied with the press.
• Never turn the release valve more than one full turn. Do not unscrew release valve completely.
• Never heat the mold, the moulds base or the cover over 200F.
• Use the press on hard, levelled and solid surfaces only.
• Keep oil at the correct level at all times.